Almightier ®- TOX Biotoxicity Analyzer
The Almightier®-TOX Bio-toxicity Water Quality Analyzer, developed based on the luminescent bacteria comprehensive toxicity principle, meets ISO 11348-3 and GB/T 15441 standards. Featuring continuous, rapid, and automated monitoring capabilities, its exceptional sensitivity directly and objectively reflects aquatic environments' acute combined toxicity to organisms. This instrument provides crucial technical support for water quality monitoring and early warning systems. This product is suitable for: rivers and lakes, surface water, drinking water, tap water, industrial sewage, hospital wastewater, etc.
Parameter
Instrument characteristics
Instrument Usage

Analysis range

0~100%

Resolution ratio

1%

Error

Bottle <3%; water sample <3%

Repetitiveness

10%

Range drift

±5% F.S.

Pure water light loss

±3%

Determination period

Within 1 to 24 hours, it is set in hours

Analysis mode

 integral point

Run by the hour, up to 24 groups per day

 margin

Run for 0-9999 minutes at intervals

 hand movement

Manual analysis

 long-range

Remote control by MODBUS; dry contact control

Calibration method

Number of intervals

The interval was calibrated according to the cumulative analysis

Number of days between intervals

Interval calibration is performed according to the number of running days

 hand movement

Manual calibration

 long-range

Remote control is performed in MODBUS mode

Cleaning method

 voluntarily

Analysis cleaning; fault cleaning; abnormal power failure cleaning; emergency shutdown cleaning

 hand movement

Clean by hand

report to the police

Low level alarm; self-test alarm; fault alarm; out of specification alarm (one relay)

Communication

An RS232 or RS485 interface standard MODBUS protocol

Memory

About 20,000 groups (power off automatic save); support USB drive export EXCEL;

Put a seal on

Micro industrial thermal printer (optional)

Maintenance cycle

About 30 days, 45 minutes

Cell display

7 inch LCD, 800*480 resolution, TFT true color touch screen

Service environment

5-35℃, humidity <90% (no condensation)

Water sample temperature

5—35℃

Water harvesting unit

Used for water sample circulation and retention; automatic backwash precision filtration system (optional)

Size

90cm×65cm×43cm

Weight

55KG

Source

AC 220V ± 10%, 50Hz ± 1%

Power

150W

  • The main components are imported brands to ensure their accuracy, stability and reliability;
  • Infrared measurement unit, quantitative and accurate;
  • Using positive/negative pressure flow technology, the peristaltic pump tube does not pass through the liquid, stable and durable.
  • In accordance with ISO and GB/T standards, automatic toxicity detection
  • Fluorescence photon sensor
  • RS232/RS485 interface, standard MODBUS protocol, can remotely read the operating status and related data of the instrument;

Emission monitoring station building:

  • Five parameters of water quality (temperature, pH, dissolved oxygen, conductivity and turbidity)
  • Total phosphorus online analyzer
  • Online analysis of ammonia nitrogen
  • COD on line analyzer
  • Total nitrogen online analyzer
  • Data collector (upload to the data center of the Environmental Protection Bureau)
  • Customized water distribution system
  • Monitoring station and supporting facilities
  • coli online analyzer
  • Biotoxicity online analyzer
Previous :
No Data
No Data
: Next